Factory Docs

Factory Docs

Open in ChatGPT
Ask ChatGPT about this page
Open in Claude
Ask Claude about this page

3D Printing

Equipment

System Quantity Process Best suited for
Formlabs Form 3L 1 SLA resin Large, detailed resin parts
Bambu Lab H2D 3 FDM / digital fabrication Large and engineering FDM, dual-material work
Bambu Lab X1-Carbon 1 FDM Engineering and abrasive-filled filaments
Bambu Lab P1S 1 FDM General-purpose FDM

The Form 3L is supported by a large curing station and manual wash bath. All three H2Ds have the 40 W laser, ventilation, and digital/vinyl cutter modules.

Which Printer Should I Use?

Need Recommended system
High-detail or smooth resin part Form 3L
Large resin part Form 3L
Routine PLA/PETG prototype P1S, X1C, or H2D
Large FDM part H2D
Dual-material/support-material print H2D
Engineering/high-temperature filament H2D or X1C
Carbon/glass-fiber-filled filament H2D or X1C
Laser cutting/engraving H2D 40 W laser
Adhesive vinyl H2D mechanical cutter, not the laser

Use the simplest available printer that satisfies the job. This keeps the H2Ds available when their larger volume, dual nozzles, heated chamber, laser, or cutter capabilities are actually needed.

General FDM Workflow

  1. Export the model as 3MF or STL.
  2. Open it in Bambu Studio.
  3. Select the physical printer, nozzle, plate, and actual material.
  4. Orient the part for strength and manufacturability.
  5. Configure supports, walls, infill, and layer height.
  6. Slice and inspect the toolpath.
  7. Confirm the build plate is clean and correctly installed.
  8. Confirm sufficient filament is available.
  9. Start the print and verify the first layer.
  10. Allow the bed and part to cool before removal when appropriate.

See Bambu Studio and Slicing for detailed software instructions.

General SLA Workflow

  1. Export the model as STL or 3MF.
  2. Open it in PreForm.
  3. Select the Form 3L and installed resin.
  4. Orient and support the model.
  5. Print.
  6. Remove the part and wash it in the manual wash bath for the resin-specific time.
  7. Allow the part to dry completely.
  8. Remove supports at the appropriate stage for the resin/process.
  9. Cure in the large curing station using the resin-specific cure schedule.

See PreForm for preparation details and Formlabs Form 3L for hardware and post-processing guidance.

Research Reproducibility

For FDM specimens, record at minimum:

  • Printer and nozzle diameter
  • Filament manufacturer, product, and lot when available
  • Drying/conditioning
  • Layer height
  • Wall/perimeter count
  • Top/bottom layers
  • Infill pattern and density
  • Build orientation
  • Nozzle, bed, and chamber settings
  • Slicer/profile version

For SLA specimens, record:

  • Printer
  • Resin, revision, and lot when available
  • Layer height
  • Orientation and support strategy
  • Wash solvent and duration
  • Drying procedure
  • Cure temperature and duration
  • Pre-test conditioning

"3D printed PLA" or "resin printed" is not a reproducible material specification. Process history materially affects mechanical properties.

General Safety

  • Keep hands and tools away from moving printer mechanisms.
  • Nozzles, build plates, chambers, and recently printed parts may be hot.
  • Keep printers free of combustible clutter.
  • Use ventilation and filtration appropriate to the process and material.
  • Review the SDS before using unfamiliar resin, solvent, filament, coating, or sheet stock.
  • Liquid photopolymer resin requires chemical handling precautions.
  • Laser operation introduces eye, fire, and decomposition-product hazards beyond normal printing.
  • Never laser-process PVC/vinyl or unknown materials. Use the H2D mechanical cutter for adhesive vinyl.
Last updated 2 days ago
Was this helpful?
Thanks!